Install One UI 3.0 OTA Firmware (Beta) on Galaxy Note 10 & Note 10+

Samsung has started rolling out the One UI 3.0 firmware update to the Samsung Galaxy Note 10 (SM-N970F) and Note 10+ (SM-N975F). The update is available on all Note 10 and Note 10+ devices in the UK, but more countries are expected to be included soon.

The One UI 3.0 firmware update is already available for the Galaxy S20/S20+/S20 Ultra, Galaxy Note 20 and Note 20 Ultra. One UI 3.0 for the Note 10/10+ is available in the form of an OTA update. You can install the new firmware by signing up for the Beta program using the Samsung Members app.

If you are not eligible for the new update, you can download the One UI 3.0 OTA zip file and flash it using a custom recovery. Follow the detailed guide below on how to update your Note 10 and Note 10+.

How to install One UI 3.0 firmware on Galaxy Note 10 and Note 10+

Download Center

Thanks to t-shock who managed to capture the OTA file, you can download the file and flash it on your device.

Samsung Galaxy Note 10 (SM-N970F):

• TBD

Samsung Galaxy Note 10+ (SM-N975F):

• DTJ4 firmware (One UI 2.5) | N975FXXU6DTJ4
• ZTK6 firmware (One UI 3.0 Beta) | N975FXXU6ZTK6

Rename the downloaded One UI 3.0 Beta file to update.zip and move it to the root of your phone’s SD Card.

Prerequisites

• Make a full backup of all the data on your phone. There is a risk involved every time you flash a custom image, and in most cases, you need to factory reset your phone.  A backup will keep all of your data safe.
• Charge your phone to at least 60%. In case something goes wrong and the phone gets stuck, it will not turn off due to a low battery.
• Install the USB drivers for the Samsung Galaxy Note 10/10+. If you do not install the drivers, the computer will not be able to recognize the phone.
• Download the latest Odin tool to flash the firmware.

Part 1 (Install DTJ4 firmware )

1. Firstly, download Odin. We will use this tool to flash the required firmware in order to use the update file.
2. Download the required firmware for your phone’s model. Extract the zip file. You will get six different files. You will use only four of those files.
3. Take your phone, press, and hold the power button and select “Power Off”. Once the phone has shut down, press and hold the volume down, volume up, and power keys at the same time while plugging your phone in. Release the keys when the phone goes into Download Mode. The phone will tell you that you are about to go into Download Mode. Press the volume up button to confirm.
4. Launch the Odin tool on your computer. If all the correct USB drivers are properly installed, the box under ID:COM will turn blue. This means that Odin recognizes the phone and it is ready to flash the firmware.
5. Please be warned that this will erase everything on your phone, so make a backup before you perform this step. Click on BL and select one of the six files that start with BL. Do the same thing for AP, CP, and CSC. Leave USERDATA empty. Once you have selected all the files, click the start button. 
6. Wait for Odin to flash the firmware. The phone will reboot automatically once everything finishes.

Part 2 – Install One UI 3.0 OTA update

1. Press and hold the Power button and tap on “Power Off”. This will turn off the phone.
2. Press and hold the volume up, and Power buttons at the same time. This will put your Galaxy Note 10/10+ in recovery mode. (It should be a stock recovery, not a custom one).
3. While in recovery mode, select “apply update from SD card“. You can move up and down using the volume keys and select options using the power button.
4. Find the OTA ZIP update (update.zip) file and swipe to flash it. The phone will begin with the
5. installation process of the One UI 3.0 OTA update. Wait for the phone to restart.

The first boot will take a few minutes. The phone will optimize applications for the new Android version. Once the phone boots up, you will enjoy the brand new One UI 3.0 Beta update on your Galaxy Note 10 and Note 10+.